Home > Knowledge > Content
How to prolong the service life of stone carving machine
Jul 14, 2017

First of all, the stone engraving machine must be installed grounding line, voltage regulator, can not be charged to plug the CNC card. After use must cut off the power, do not power standby, otherwise it will affect the machine life

Second stone engraving machine daily running time should be controlled under 10 hours, to ensure that the cooling water and the normal work of water pumps, can not make water-cooled spindle motor water shortage, the regular replacement of cooling water, in order to prevent the water temperature too high, burned the spindle motor.

Once again the stone carving machine should be cleaned in time after use, the control box should be cleaned once a week to ensure the cleanliness of the machine.

Finally, please do not rush the water to the engraving machine guide rails, so as to avoid damage to the use of parts.